Geometry Part 8: Area and Perimeter (cont’d)

by C. Elkins, OK Math and Reading Lady

This post features 3 more area and perimeter misconceptions students often have. I have included some strategies using concrete and pictorial models to reinforce the geometry and measurement standards. Refer to Geometry Part 7 for 2 other common misconceptions.

Also, check out some free resources at the end of this post!!

Misconception #3:  A student only sees 2 given numbers on a picture of a rectangle and doesn’t know whether to add them or multiply them.

  • Problem:  The student doesn’t know the properties of a rectangle that apply to this situation — that opposite sides are equal in measurement.
  • Problem:  The student doesn’t see how counting squares can help calculate the area as well as the perimeter.

Ideas:

  • Give the correct definition of a rectangleA quadrilateral (4 sides) with 4 right angles and opposite sides are equal.
  • Give the correct definition of a square:  A quadrilateral (4 sides) with 4 right angles and all sides are equal. From this, students should note that squares are considered a special kind of rectangle.  Yes, opposite sides are equal – but in this case all sides are equal.
  • Using square tiles and graph paper (concrete experience), prove that opposite sides of a rectangle and square are equal.
  • Move to the pictorial stage by making drawings of rectangles and squares. Give 2 dimensions (length and width) and have students tell the other 2 dimensions.  Ask, “How do you know?” You want them to be able to repeat “Opposite sides of a rectangle are equal.” With this information, students can now figure the area as well as the perimeter.
  • Move to the abstract stage by using story problems such as this:  Mr. Smith is making a garden. It will be 12 feet in length and have a width of 8 feet.  How much fence would he need to put around it? (perimeter) How much land will be used for the garden? (area).
  • Measure rectangular objects in the classroom with some square units.  Show how to use them to find the perimeter as well as the area using just 2 dimensions.  Ask, “Do I need to fill it all the way in to determine the answer?”  At the beginning – YES (so students can visualize the point you are trying to make). Later, they will learn WHY they only need to know 2 of the dimensions to figure the area or perimeter.

Continue reading

Geometry Part 3: Composing and Decomposing

by C. Elkins, OK Math and Reading Lady

Composing and decomposing geometric shapes (2D and 3D) should be centered around concrete and pictorial methods. In this and upcoming posts, I will illustrate some methods using various manipulatives and line drawings which help students take a shape apart or put shapes together. If you refer back to  Geometry Part 1: The Basics, all grade levels KG-5th have standards dealing with this issue. Some of the experiences I plan to share will also help students relate to multiplication, division, fractions, area, and other geometry concepts (such as rotations, reflections, slides).

Refer to Geometry Part 2: van Hiele levels to determine if the activities you are choosing are appropriate for Level 0, 1, or 2 students.

One Inch Color Tiles:

1.  Can you make a larger square out of several individual squares?

  • Level 0 students will be using the visual aspect of making it look like a square.
  • Level 1 students will be checking properties to see if their squares are indeed squares (with the same number of tiles on each side).
  • Level 2 students will be noticing they are creating an array (ex: 3 x 3 = 9) and perhaps learning about squared numbers. 3 squared = 9. They might be able to predict the total number of tiles needed when given just the length of one side.

2.  How many rectangles can you make using 2 or more squares? (Level 0-1)

  • Level 1:  Are the green and blue rectangles the same size (using properties to determine)?

Continue reading

Geometry Part 1: The Basics

by C. Elkins, OK Math and Reading Lady

For many schools, it seems as if Geometry and Measurement standards remain some of the lowest scored. This has always puzzled me because it’s the one area in math that is (or should be) the most hands-on — which is appealing and more motivating to students. Who doesn’t like creating with pattern blocks, making 2 and 3D shapes with various objects, using measurement tools, and getting the chance to leave your seat to explore all the classroom has to offer regarding these standards? So what is it about geometry and measurement that is stumping our students? Here are some of my thoughts – please feel free to comment and add your own:

  • Vocabulary? (segment, parallel, trapezoid, perpendicular, volume, area, perimeter, etc.)
  • Lack of practical experience? Not all homes have materials or provide opportunities for students to apply their knowledge (like blocks, Legos, measuring cups for cooking, tape measures for building, etc.).
  • Background knowledge about the size of actual objects? We take it for granted students know a giraffe is taller than a pickup truck. But if students have not had the chance to go to a zoo, then when they are presented a picture of the two objects they might not really know which is taller / shorter. Think of all of the examples of how we also expect students to know the relative weights of objects. Without background knowledge or experience, this could impede them regarding picture type assessments.
  • Standards keep getting pushed to lower grades when students may not have reached the conservation stage? If they think a tall slender container must hold more than a shorter container with a larger diameter, or they think a sphere of clay is less than the same size sphere flattened out, they may have difficulty with many of the geometry and measurement standards.

In this post, I will focus on Geometry. Here is a basic look at the geometry continuum (based on OK Stds.):

KG:  Recognize and sort basic 2D shapes (circle, square, rectangle, triangle). This includes composing larger shapes using smaller shapes (with an outline available).

1st:  Recognize, compose, and decompose 2D and 3D shapes. The new 2D shapes are hexagon and trapezoid. 3D shapes include cube, cone, cylinder, sphere.

2nd: Analyze attributes of 2D figures. Compose 2D shapes using triangles, squares, hexagons, trapezoids and rhombi. Recognize right angles and those larger or smaller than right angles.

3rd:  Sort 3D shapes based on attributes. Build 3D figures using cubes. Classify angles: acute, right, obtuse, straight.

4th:  Name, describe, classify and construct polygons and 3D figures.  New vocabulary includes points, lines, segments, rays, parallel, perpendicular, quadrilateral, parallelogram, and kite.

5th: Describe, classify, and draw representations of 2D and 3D figures. Vocabulary includes edge, face, and vertices. Specific triangles include equilateral, right, scalene, and isosceles.

Here are a couple of guides that might help you with definitions of the various 2D shapes. The 2D shapes guide is provided FREE here in a PDF courtesy of math-salamander.com.  I included a b/w version along with my colored version. The Quadrilateral flow chart I created will help you see that some shapes can have more than one name. Click on the link for a free copy (b/w and color) of the flow chart. Read below for more details about understanding the flow chart.

PLEASE note these very important concepts: Continue reading

Math Art Part 2: Decomposing and composing squares and triangles

by C. Elkins, OK Math and Reading Lady

I wanted to show you another example of math art, this time using squares and triangles. This project also falls under the standards dealing with decomposing and composing shapes. With this project, students can create some unique designs while learning about squares, triangles, symmetry, fractions, and elements of art such as color and design. It would be a great project for first grade (using 2 squares) or for higher grades using 3 to 4 squares.

A great literature connection to this project is the book “The Greedy Triangle” by Marilyn Burns. (Click link to connect to Amazon.) The triangle in this book isn’t content with being 3-sided and transforms himself into other shapes (with the help of the Shapeshifter). Lots of great pictures showing real objects in the shape of triangles, squares, pentagons, hexagons, and more.

Marilyn Burns is a great math educator to check out, if you haven’t already. She has a company called Math Solutions (check out MathSolutions.com). Marilyn and her consultants have wonderful resources and advocate for constructivist views regarding math education. She is also the author of Number Talks and many math and literature lesson ideas.

The 4 Triangle Investigation

Materials needed:

  • Pre-cut squares 3″, 4″ or 5″ (I used brightly colored cardstock.)
  • Scissors and glue
  • Background paper to glue shapes to

Directions

  1. Model how to cut a square in half (diagonally) to make two right triangles. (I advocate folding it first so that the two resulting triangles are as equivalent as possible.)
  2. Guide students into showing different ways to put two triangles together to form another shape. Rule: Sides touching each other must be the same length. Let students practice making these shapes on their desk top (no gluing needed). 
  3. Help students realize they may need to use these actions:
    • Slide the shape into place
    • Flip it over to get a mirror image
    • Rotate it around in a circular motion to align the edges
  4. Students are then given 2 squares (to be cut into 4 triangles) and investigate different shapes they can make following the above rule. Here are some possibilities:
  5. As the teacher,  you can decide how many creations you want each student to attempt.
  6. These shapes can be glued onto construction paper (and cut out if desired).
  7. As an extension, shapes can be sorted according to various attributes:
    • # of sides
    • symmetry
    • # of angles
    • regular polygons vs. irregular

Continue reading